/* vm.c: Glulxe code related to the VM overall. Also miscellaneous stuff.
    Designed by Andrew Plotkin <erkyrath@eblong.com>
    http://eblong.com/zarf/glulx/index.html
*/

#include "glk.h"
#include "glulxe.h"

/* The memory blocks which contain VM main memory and the stack. */
unsigned char *memmap = NULL;
unsigned char *stack = NULL;

/* Various memory addresses which are useful. These are loaded in from
   the game file header. */
glui32 ramstart;
glui32 endgamefile;
glui32 origendmem;
glui32 stacksize;
glui32 startfuncaddr;
glui32 origstringtable;
glui32 checksum;

/* The VM registers. */
glui32 stackptr;
glui32 frameptr;
glui32 pc;
glui32 stringtable;
glui32 valstackbase;
glui32 localsbase;
glui32 endmem;
glui32 protectstart, protectend;

/* This is not needed for VM operation, but it may be needed for
   autosave/autorestore. */
glui32 prevpc;

void (*stream_char_handler)(unsigned char ch);
void (*stream_unichar_handler)(glui32 ch);

/* setup_vm():
   Read in the game file and build the machine, allocating all the memory
   necessary.
*/
void setup_vm()
{
  unsigned char buf[4 * 7];
  int res;

  pc = 0; /* Clear this, so that error messages are cleaner. */
  prevpc = 0;

  /* Read in all the size constants from the game file header. */

  stream_char_handler = NULL;
  stream_unichar_handler = NULL;

  glk_stream_set_position(gamefile, gamefile_start+8, seekmode_Start);
  res = glk_get_buffer_stream(gamefile, (char *)buf, 4 * 7);
  if (res != 4 * 7) {
    fatal_error("The game file header is too short.");
  }
  
  ramstart = Read4(buf+0);
  endgamefile = Read4(buf+4);
  origendmem = Read4(buf+8);
  stacksize = Read4(buf+12);
  startfuncaddr = Read4(buf+16);
  origstringtable = Read4(buf+20);
  checksum = Read4(buf+24);

  /* Set the protection range to (0, 0), meaning "off". */
  protectstart = 0;
  protectend = 0;

  /* Do a few sanity checks. */

  if ((ramstart & 0xFF)
    || (endgamefile & 0xFF) 
    || (origendmem & 0xFF)
    || (stacksize & 0xFF)) {
    nonfatal_warning("One of the segment boundaries in the header is not "
      "256-byte aligned.");
  }

  if (endgamefile != gamefile_len) {
    nonfatal_warning("The gamefile length does not match the header "
      "endgamefile length.");
  }

  if (ramstart < 0x100 || endgamefile < ramstart || origendmem < endgamefile) {
    fatal_error("The segment boundaries in the header are in an impossible "
      "order.");
  }
  if (stacksize < 0x100) {
    fatal_error("The stack size in the header is too small.");
  }
  
  /* Allocate main memory and the stack. This is where memory allocation
     errors are most likely to occur. */
  endmem = origendmem;
  memmap = (unsigned char *)glulx_malloc(origendmem);
  if (!memmap) {
    fatal_error("Unable to allocate Glulx memory space.");
  }
  stack = (unsigned char *)glulx_malloc(stacksize);
  if (!stack) {
    glulx_free(memmap);
    memmap = NULL;
    fatal_error("Unable to allocate Glulx stack space.");
  }
  stringtable = 0;

  /* Initialize various other things in the terp. */
  init_operands(); 
  init_accel();
  init_serial();

  /* Set up the initial machine state. */
  vm_restart();
}

/* finalize_vm():
   Deallocate all the memory and shut down the machine.
*/
void finalize_vm()
{
  stream_set_table(0);

  if (memmap) {
    glulx_free(memmap);
    memmap = NULL;
  }
  if (stack) {
    glulx_free(stack);
    stack = NULL;
  }

  final_serial();
}

/* vm_restart(): 
   Put the VM into a state where it's ready to begin executing the
   game. This is called both at startup time, and when the machine
   performs a "restart" opcode. 
*/
void vm_restart()
{
  glui32 lx;
  int res;

  /* Deactivate the heap (if it was active). */
  heap_clear();

  /* Reset memory to the original size. */
  lx = change_memsize(origendmem, FALSE);
  if (lx)
    fatal_error("Memory could not be reset to its original size.");

  /* Load in all of main memory */
  glk_stream_set_position(gamefile, gamefile_start, seekmode_Start);
  for (lx=0; lx<endgamefile; lx++) {
    res = glk_get_char_stream(gamefile);
    if (res == -1) {
      fatal_error("The game file ended unexpectedly.");
    }
    if (lx >= protectstart && lx < protectend)
      continue;
    memmap[lx] = res;
  }
  for (lx=endgamefile; lx<origendmem; lx++) {
    memmap[lx] = 0;
  }

  /* Reset all the registers */
  stackptr = 0;
  frameptr = 0;
  pc = 0;
  prevpc = 0;
  stream_set_iosys(0, 0);
  stream_set_table(origstringtable);
  valstackbase = 0;
  localsbase = 0;

  /* Note that we do not reset the protection range. */

  /* Push the first function call. (No arguments.) */
  enter_function(startfuncaddr, 0, NULL);

  /* We're now ready to execute. */
}

/* change_memsize():
   Change the size of the memory map. This may not be available at
   all; #define FIXED_MEMSIZE if you want the interpreter to
   unconditionally refuse. The internal flag should be true only when
   the heap-allocation system is calling.
   Returns 0 for success; otherwise, the operation failed.
*/
glui32 change_memsize(glui32 newlen, int internal)
{
  long lx;
  unsigned char *newmemmap;

  if (newlen == endmem)
    return 0;

#ifdef FIXED_MEMSIZE
  return 1;
#else /* FIXED_MEMSIZE */

  if ((!internal) && heap_is_active())
    fatal_error("Cannot resize Glulx memory space while heap is active.");

  if (newlen < origendmem)
    fatal_error("Cannot resize Glulx memory space smaller than it started.");

  if (newlen & 0xFF)
    fatal_error("Can only resize Glulx memory space to a 256-byte boundary.");
  
  newmemmap = (unsigned char *)glulx_realloc(memmap, newlen);
  if (!newmemmap) {
    /* The old block is still in place, unchanged. */
    return 1;
  }
  memmap = newmemmap;

  if (newlen > endmem) {
    for (lx=endmem; lx<newlen; lx++) {
      memmap[lx] = 0;
    }
  }

  endmem = newlen;

  return 0;

#endif /* FIXED_MEMSIZE */
}

/* pop_arguments():
   If addr is 0, pop N arguments off the stack, and put them in an array. 
   If non-0, take N arguments from that main memory address instead.
   This has to dynamically allocate if there are more than 32 arguments,
   but that shouldn't be a problem.
*/
glui32 *pop_arguments(glui32 count, glui32 addr)
{
  int ix;
  glui32 argptr;
  glui32 *array;

  #define MAXARGS (32)
  static glui32 statarray[MAXARGS];
  static glui32 *dynarray = NULL;
  static glui32 dynarray_size = 0;

  if (count == 0)
    return NULL;

  if (count <= MAXARGS) {
    /* Store in the static array. */
    array = statarray;
  }
  else {
    if (!dynarray) {
      dynarray_size = count+8;
      dynarray = glulx_malloc(sizeof(glui32) * dynarray_size);
      if (!dynarray)
        fatal_error("Unable to allocate function arguments.");
      array = dynarray;
    }
    else {
      if (dynarray_size >= count) {
        /* It fits. */
        array = dynarray;
      }
      else {
        dynarray_size = count+8;
        dynarray = glulx_realloc(dynarray, sizeof(glui32) * dynarray_size);
        if (!dynarray)
          fatal_error("Unable to reallocate function arguments.");
        array = dynarray;
      }
    }
  }

  if (!addr) {
    if (stackptr < valstackbase+4*count) 
      fatal_error("Stack underflow in arguments.");
    stackptr -= 4*count;
    for (ix=0; ix<count; ix++) {
      argptr = stackptr+4*((count-1)-ix);
      array[ix] = Stk4(argptr);
    }
  }
  else {
    for (ix=0; ix<count; ix++) {
      array[ix] = Mem4(addr);
      addr += 4;
    }
  }

  return array;
}

/* verify_address():
   Make sure that count bytes beginning with addr all fall within the
   current memory map. This is called at every memory (read) access if
   VERIFY_MEMORY_ACCESS is defined in the header file.
*/
void verify_address(glui32 addr, glui32 count)
{
  if (addr >= endmem)
    fatal_error_i("Memory access out of range", addr);
  if (count > 1) {
    addr += (count-1);
    if (addr >= endmem)
      fatal_error_i("Memory access out of range", addr);
  }
}

/* verify_address_write():
   Make sure that count bytes beginning with addr all fall within RAM.
   This is called at every memory write if VERIFY_MEMORY_ACCESS is 
   defined in the header file.
*/
void verify_address_write(glui32 addr, glui32 count)
{
  if (addr < ramstart)
    fatal_error_i("Memory write to read-only address", addr);
  if (addr >= endmem)
    fatal_error_i("Memory access out of range", addr);
  if (count > 1) {
    addr += (count-1);
    if (addr >= endmem)
      fatal_error_i("Memory access out of range", addr);
  }
}

/* verify_array_addresses():
   Make sure that an array of count elements (size bytes each),
   starting at addr, does not fall outside the memory map. This goes
   to some trouble that verify_address() does not, because we need
   to be wary of lengths near -- or beyond -- 0x7FFFFFFF.
*/
void verify_array_addresses(glui32 addr, glui32 count, glui32 size)
{
  glui32 bytecount;
  if (addr >= endmem)
    fatal_error_i("Memory access out of range", addr);

  if (count == 0)
    return;
  bytecount = count*size;

  /* If just multiplying by the element size overflows, we have trouble. */
  if (bytecount < count)
    fatal_error_i("Memory access way too long", addr);

  /* If the byte length by itself is too long, or if its end overflows,
     we have trouble. */
  if (bytecount > endmem || addr+bytecount < addr)
    fatal_error_i("Memory access much too long", addr);
  /* The simple length test. */
  if (addr+bytecount > endmem)
    fatal_error_i("Memory access too long", addr);
}